- Home
- Equipment
Refine by
Gamma Meccanica Environmental Equipment & Supplies
38 equipment items found
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The TANDEM technology applied to the recycling of heavily printed, contaminated and high humidity plastic materials guarantees the excellent quality of the granule with a notable energy savings in comparison with conventional recycling systems that foresee the re-extrusion of the material. The plant is composed of a COMPAC unit and two extruders arranged in succession. The short, non-vented ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The packaging unit is the last step of the production process. Gamma Meccanica S.p.A. proposes different packaging systems so to respond to the client’s needs. The packs are wrapped up with polyethylene and thermoshrinked when they come out from the stacker. During the packaging the packs, depending on the density, can be compressed, reducing its volume, so reducing the transportation ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The melting furnace for glass wool production lines uses electric energy to melt raw materials trasforming it into liquid glass. The feeding system keeps a uniform layer of not fused raw materials on the entire surface of “melting bath tube” so that the superior part of melting system remains cold (cold top). Then the liquid glass is sent through a special canal heated by gas (feeder) ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The fiberizer is installed under the feeder. The melted glass, opportunely dosed through special openings (bushing), electroheated and cooled, arrives to the fiberizers that essentially consist of perforated disc that rotates at high speed and is thermoheated. Due to the centrifuge force, the glass is pushed through the perforated disc openings (using compressed air and combustion gas of special ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The roll up machine is the unit that rolls up automatically the mattresses or the felt. The roll up machine can be equipped with a system of precompression which compresses the felt up to a required value before the phase of rolling up begins. The machine wraps automatically the roll from the outside with a plastic film or paper. So the roll is being sealed, preventing rollout. A special ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
Ceiling tiles market in the last years grow up and changed is trend: the old standard ceiling tiles panel (made by a mix of cement and fiber) are now replaced by a new generation product (made by mineral wool) more easy to produce and effective as thermal and acoustic insulation , preserving the Aesthetics & Design. For this reason Gamma Meccanica propose this line: easy to install and ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
Gamma Meccanica SpA is specialized in the production of technological lines for the regeneration of plastic materials in plastic recycling plants. The consolidated experience and core competencies combined with a high level of technical solutions enable the company to meet the growing needs of international markets and to offer customized solutions for each ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The conventional regeneration lines are ideal for the recycling of plastics that foresee the use of a granulator. It can be also equipped with our FORCE FEED system complete with storage silo, single or dual auger configuration for ground rigid materials, film and foam flake. This type of line is available in different models depending on the production capacity. Every line can be customized upon ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The pelletizer system completes the recycling process: this is the final part of the plant. The recycled material comes out of the die plate in form of “spaghetti” and it is “cut” by a series of rotating blades into small cylinders which are cooled with water and then dried in a centrifuge. During this stage, the material takes on the form of a ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The crimping machine is the special unit for fiber orientation, installed before the curing oven. By acting on the orientation of the fibers the crimping improves the mechanical characteristics of the final product. The vertical fiber orientation causes the high mechanical compressive strength and delamination strength. The tensile strength in the direction of the thickness increases from 5 to 10 ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The cutting units are used to complete the production process, cutting product to the requested size. The cutting units generally include the following groups: cutting and trimming of the lateral edges; longitudinal slitting unit; thickness band saw; cross-cutting unit. All the cutting units of Gamma Meccanica S.p.A. use the cutting blades of “no dust” type rotating at very low speed. ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The stacker is the production unit of rock wool plant installed before packaging. The panels once cut to size are ready to be stacked and ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The capacity of the line for the production of extruded polystyrene XPS boards can vary from 300 to 1500 kg/h, equivalent to 70000-300000 m³ / ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The blowing agents are one of the main components used in the extrusion process. Gamma Meccanica S.p.A. lines are able to use all blowing agents present on the market: CO2, Ethanol, Butane, Dme, HFA, Other blowing agents. The percentages of use can be based on customer request to optimize the capacity of the line, the costs and the characteristics of the final ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The stitched mattresses production line is designed to treat the rock wool felts produced on the main line. The stitched mattresses consist of a rock wool felt stitched on a support. They are mainly used for the insulation of cylindrical surfaces (pipes, ducts, tanks), conical and in general for wide surfaces of irregular form. The production of stitched mattresses foresees the application of a ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The forming chamber is a part of the plant where the glass wool fiber produced on fiberizer is collected. This machine consists of perforated horizontal flight conveyor (from which is sucked a big quantity of air). Two vertical longitudinal contrarotating belt conveyors form two side walls of the chamber. Two further belt conveyors form 2 walls of the chamber (anterior and posterior). These ...
Manufactured by:Innovative Recycling Solutions, LLC based inGreer, SOUTH CAROLINA (USA)
The Trim-Co is the smallest line made by Gamma Meccanica. As all the lines belonging to the COMPAC range, Trim-Co consists of a cutter-compactor, extruder and a pelletizer. The Trim-Co is designed to regenerate materials such as film, fibers, fabrics and yarns. The line is particularly suitable for regenerating HDPE, LDPE, PE and PP in the shape of film, shopping bags, small cut reels and ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
Gamma Meccanica S.p.A. developed a special crimping machine for glass wool which allows to improve the mechanical characteristics of the product, acting directly on the fiber orientation. This system was realised on the basis of the requests and in cooperation with some important manufacturers of glass wool. The crimping machine for glass wool is able to vertically orientate the wool fiber so as ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The purpose of the curing oven is to polymerize binding agents (like resin of different ones) previously mixed with the fiber in the fiberizing zone; moreover during the curing process the felt receives its final ...
Manufactured by:Gamma Meccanica SpA based inBibbiano (RE), ITALY
The cutting units are placed after the curing oven. At the curing oven output occurs the material trimming: the edge-trims are recovered automatically and turned back into the production process. Then follows the longitudinal cutting and the cross cutting, on the basis of required final dimensions. In this production phase the product assumes the required final geometric ...